As an Amazon Associate I earn from qualifying purchases.
1. Power Probe
Power Probe Break Out Box RedPower Probe
- This can bus circuit tester is compatible with 12v and 24v systems. Once plugged into the cars dLC OBD port It will start to check the pins for any Voltage present. If present the respective LED’s W.
Akozon 6 Channel Universal Breakout Leads 2.8 mm HT306 for Auto Diagnostic Oscilliscope BlackAkozon
- Convenient use: they allow an oscilloscope to to connect to variety of components in the engine compartment, without having to strip or pierce any insulation and with no risk of damage to connectors.
Connector sizethe breakout leads size, black: 2. 8 mm package included:1 x 6 Channel Universal Breakout Leads. Easy to connect: the output signal from the other end of the lead 4 mm banana connector by HT30A test line access oscilloscope input port.
6 channel: 6 channel car multifunctional lead HT306 do not need to be equipped with many special wire to be used for engine diagnosis. Read the data: the wire is easy to access the existing automotive wiring harness, convenient to read the signal of various sensors.
|Height||0 cm (0 Inches)|
|Length||0 cm (0 Inches)|
|Weight||0.09 kg (0.21 Pounds)|
|Width||0 cm (0 Inches)|
3. Max Measure
Automotive Power Probe 2-24 Volt Digital Multi Tester Circuit Tester 5m LeadMax Measure
- The cable length is about 5m which allows you test any electrical system easily. Can be used to test continuity, follow and locate short circuits, check lamp, test polarity of a voltage, check electric motor, test for bad ground contacts and measure dc voltage from 2V to 24V etc.
Wide range applications. It can also be used to follow and locate short circuits. Easy operation-after a simple hook-up of the unit to the vehicle's battery, automotive technician can conduct a positive or negative battery current to the tip by rocking the power switch forward or backward.
When the current exceeds 8A, the unit will disconnect the current automatically. Long test lead. The unit can be used to measure dc voltage and test for continuity or for bad ground contacts. Overload protection.
Silverline 633597 Circuit Tester 6 V and 12 VSilverline
- Item package Length: 24. 0 cm. Model number: 633597. Item package Width: 7. 6 cm. Item package Height: 1. 8 cm.
|Height||9 cm (3.54 Inches)|
|Length||25.5 cm (10.04 Inches)|
|Weight||0.04 kg (0.09 Pounds)|
|Width||4 cm (1.57 Inches)|
Power Circuit Probe Electrical System Diagnostics, Autel Automotive Circuit Tester PS100Autel
- Quickly check circuitps100 electrical Circuit Tester Test for bad ground contacts instantly, allowing you to follow and locate shorts fast without wasting fuses. Read date & extendableeasy to read avometer allows you to read voltage, current and resistance at the fingertip.
20ft extendable cable provides excellent accessibility to test along the vehicle. Durable and safetyan auto circuit breaker makes this tool very safe and sustainable; Its short-circuit protected as well as a safety measure to protect the device from overload.
Multi-functionalautel powerscan ps100 automotive Electrical Tester Performs every type of service including power injection, polarity checks, measurement, ground testing, continuity testing and components activation.
How to usewith a flip of the power switch, you have an instant hot/ground lead for powering up electrical components like cooling fans, etc. You can instantly identifies positive, relays, negative and open circuits. Tests for bad ground contacts instantly, allowing you to follow and locate shorts fast without wasting fuses.
|Height||10.16 cm (4 Inches)|
|Length||25.4 cm (10 Inches)|
|Width||19.05 cm (7.5 Inches)|
UNI-T Breakout Box R2 Mains Socket Test Adaptor 4mmUNI-T
- Quick and easy testing of R2 and R1+R2 testing without removing the leads. Standard 4mm connectors to suit most types of multifunction Testers.
Test r2 and r1+r2 without removing the leads. Most multifunction testers can be used in combination with this device and standard 4mm jack test leads. Safety compliance with iec 1010 CAT III 300V.
Automotive Circuit Tester with Auto Electrical System Testing Functions Digital Voltmeter/Short Circuit Finder/Power or Ground Supply, KZYEE KM10 Power Circuit Probe KitKZYEE
- Kzyee km10 power scan kit is the most revolutionary circuit tester, which performs each type of service, checking the good and bad ground, capturing MIN/MAX voltage, testing for continuity, diagnosing circuit failures, such as, activating components on and off the vehicle, etc.
Having the ability to power up the components, windows, such as cooling fans, starters, relays, washers and so on.
Powered by the car battery or cigarette lighter, no additional battery or wires pulling needed. Also, trucks, the built-in flashlight is bright enough to light up your work area. Enables to accurately diagnose the dc voltage, AC Voltage, Resistance and Diode of the 12v-24v electrical systems by merely pressing the mode button.
Buyer be aware: only buy from kzyee uk store will get the item as described, any other 3rd party are not belong to the official sellers. Provides 20ft extension cable for you to reach all around your vehicles, and trailers 12V-24V.
|Height||7.37 cm (2.9 Inches)|
|Length||27.94 cm (11 Inches)|
|Width||22.35 cm (8.8 Inches)|
OptiMate O13 SAE Extension Lead 4.6 MeterOptimate
- Cable max. Ratings: 5 Amp. Includes in-line rubber seal for OptiMATE heavy duty SAE connector. 20°c/-4°f low temperature use. 5 amp charger lead extender with weather/dirt protected SAE connection system! Length= 460cm.
|Height||5 cm (1.97 Inches)|
|Length||15 cm (5.91 Inches)|
|Weight||0.15 kg (0.33 Pounds)|
|Width||5 cm (1.97 Inches)|
|Warranty||3 Year limited warranty|
SmartSpec 7 Pin Trailer Wiring Tester Towing Horsebox Caravan Truck Vehicle Light Electrics Circuit Diagnostic Tool 12VSmartSpec
- If it does not work for your trailer with LED light, please contact us for return and rufund. ****. Safe and dependable performance, reasonable design. Easy use- this tester has one side to connect the 7 pins plug of a trailer and the other side to connect the 7 pin socket of a car.
Deft appearance, convenient usage. This tester may not fit some trailer with LED light due to the Circuit Difference.
Surface after frosted. Potable- small size and led indicator. Stable connection -cross slotted copper needles, cooperate with the female pin. This tester indicates quickly if a failure concerns the wiring of the car or the wiring of the trailer. Powered by 1 x 9V PP3 battery not included. Easy to handle and storage. Durable material-carefully selected materials.