As an Amazon Associate I earn from qualifying purchases.1. HQ TEC
Battery Charger Type Open PCB, Battery Technologies Supported Li-Ion, Li-Polymer Battery Power Gauge, Li Polymer
HQ TEC - Product details: Please Read Full Description. Product Type: Battery. Product sub Type: Battery Chargers. Pack size: 1. Li-polymer battery power gauge.
| Brand | HQ TEC |
| Manufacturer | CPC |
| Weight | 0 kg (0 Pounds) |
| Part Number | E/TOL-10617/S |
2. HQ TEC
Li Polymer, Battery Charger Type Open PCB, Li-Ion/Li-Poly Battery Charger, Mini USB, Battery Technologies Supported Li-Ion
HQ TEC - Product Type: Battery. Product details: Please Read Full Description. Product sub Type: Battery Chargers. Li-ion/li-poly battery charger, mini usb. Pack size: 1.
| Brand | HQ TEC |
| Manufacturer | CPC |
| Weight | 0 kg (0.01 Pounds) |
| Part Number | E/PRT-10401/S |
3. Fdit
48V 14S 40A PCB Protection Board, 14 Series Li-Ion Li-Polymer Battery Cell BMS Balance Board Module with Overcharge Overdischarge Short Circuit Protection
Fdit - Suitable for lithium batteries with nominal voltage 3. 7v 10-14 strings. It adopts high current and high withstand voltage discharge MOSS. Applied to rechargeable lithium ion battery, lithium ion polymer battery. The internal components are brushed with three anti-adhesive waterproof, anti-static, anti-interference, stable ans reliable quality.
The board has short circuit protection function, balanced voltage function, over discharge protection function, overcharge protection function, low conduction internal resistance functions.100% brand new and high quality.
| Brand | Fdit |
| Manufacturer | Fdit |
| Height | 4 cm (1.57 Inches) |
| Length | 10 cm (3.94 Inches) |
| Weight | 0.11 kg (0.24 Pounds) |
| Width | 7 cm (2.76 Inches) |
| Part Number | Fdit9gr6sxcomd |
4. Kuuleyn
Battery Charging Controller Module,3S 11.1V 18650 Li-ion 12.6V Li-Polymer Battery Charging Balance Module BMS Equilibrium Board
Kuuleyn - When charging, it discharge battery which is fully charged first by resistor in order to balance current. This balancing module is used for lithium battery charging which has no balancing. Balancing charging would ensure each battery cell being fully charged at same time.
It could balance voltage and current, used for 3S 11. 1v 18650 li-ion or 12. 6v li-polymer battery charging. This balancing module has no charge/discharge protection function, so it can not replace protection board.
| Brand | Kuuleyn |
| Manufacturer | Kuuleyn |
| Height | 1 cm (0.39 Inches) |
| Length | 9 cm (3.54 Inches) |
| Weight | 0 kg (0.01 Pounds) |
| Width | 6 cm (2.36 Inches) |
| Part Number | Kuuleynpri06m1oxs1753 |
5. Operalie
Operalie Equilibrium Module,3S 11.1V 18650 Li-ion 12.6V Li-polymer Battery Charging Balance Module BMS Equilibrium Board
Operalie - It could balance voltage and current, used for 3S 11. 1v 18650 li-ion or 12. 6v li-polymer battery charging. When charging, it discharge battery which is fully charged first by resistor in order to balance current.
This equilibrium module has no charge/discharge protection function, so it can not replace protection board. This equilibrium module is used for lithium battery charging which has no balancing. Balancing charging would ensure each battery cell being fully charged at same time.
| Brand | Operalie |
| Manufacturer | Operalie |
| Height | 1 cm (0.39 Inches) |
| Length | 9 cm (3.54 Inches) |
| Weight | 0 kg (0 Pounds) |
| Width | 6 cm (2.36 Inches) |
| Part Number | Operalieggbc85a06z |
6. stronerliou
Stronerliou 3S 11.1V 18650 Li-ion 12.6V Li-Polymer Battery Charging Balance Module BMS Equilibrium Board
stronerliou - This balancing module has no charge/discharge protection function, so it can not replace protection board. When charging, it discharge battery which is fully charged first by resistor in order to balance current.
It could balance voltage and current, used for 3S 11. 1v 18650 li-ion or 12. 6v li-polymer battery charging. Balancing charging would ensure each battery cell being fully charged at same time. This balancing module is used for lithium battery charging which has no balancing.
| Brand | stronerliou |
| Manufacturer | stronerliou |
| Height | 1 cm (0.39 Inches) |
| Length | 9 cm (3.54 Inches) |
| Weight | 0 kg (0 Pounds) |
| Width | 6 cm (2.36 Inches) |
| Part Number | stronerliouvmc35bxwky |
7. Fabater
Battery Protection Board, Li-ion Charger Protection Module Li-Ion for Overcharge for Over-Discharge, Li-Polymer BMS Li-Polymer Protection Board
Fabater - Charging connector and discharging connector are separated, continuous discharging current is 15A. It has high voltage withstanding and low conduction resistance function.
Charging 5a, over-current 45a, discharging 15A, suitable for electric bicycles with ≤500W motor. The protection board is for 13 series Li-ion batteries, it can be used for ternary batteries, manganese acid batteries and cobalt acid batteries.
Stable various protective functions for charging and discharging, over-discharge protection, such as accurate overcharge protection, over current protection and short circuit protection.
| Brand | Fabater |
| Manufacturer | Fabater |
| Height | 3 cm (1.18 Inches) |
| Length | 8 cm (3.15 Inches) |
| Weight | 0.06 kg (0.12 Pounds) |
| Width | 7 cm (2.76 Inches) |
| Part Number | Fabater8cvw3i5ga4 |
8. siwetg
Siwetg Balance 4S 40A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board Balanced Charge For Drill Motor 14.8V 16.8V Lipo Cell Module 4 Series 40A Version
siwetg - Equalization version: suitable for starting current below 80A, power 135W below the drill. Scope: nominal voltage of 3. 6v, 26650, 3.
7v lithium battery including 18650, polymer lithium battery. Br/>product size: 46 * 60 * 3. 4mm balanced version. Br/>. Product weight: 103g balanced version. Br/>charging voltage: 16.
8v - 18. 1v. Br/>. 4 string 16. 8v 40a lithium battery protection board comes with recovery function-AUTO Recovery. Continuous discharge current upper limit: 40A if the cooling environment is not good, please reduce the load current use. Br/>continuous charge current upper limit: 20A.
9. Kuuleyn
3S 11.1V 18650 Li-ion 12.6V Li-polymer Battery Charging Balance Module, Equilibrium Balance Board, BMS Equilibrium Board for Lithium Battery Charging, Equilibrium Module
Kuuleyn - Application: the balance module is used to charge the lithium battery without balance. Excellent performance: When charging, it will first discharge a fully charged battery through a resistor to balance the current. Module function: bms board can balance voltage and current, used for 3S 11.
1v 18650 lithium ion battery or 12. 6v lithium polymer battery charging. Practical: the battery charging module can ensure that each battery cell is fully charged at the same time. Note: the equalibrium module has no charge/discharge protection function, so the protection board cannot be replaced.
| Brand | Kuuleyn |
| Manufacturer | Kuuleyn |
| Height | 1 cm (0.39 Inches) |
| Length | 9 cm (3.54 Inches) |
| Weight | 0 kg (0.01 Pounds) |
| Width | 6 cm (2.36 Inches) |
| Part Number | Kuuleynfsquep75nh865 |
Fdit - Suitable for lithium batteries with nominal voltage 3. 7v 10-14 strings. It adopts high current and high withstand voltage discharge MOSS. Applied to rechargeable lithium ion battery, lithium ion polymer battery. The internal components are brushed with three anti-adhesive waterproof, anti-static, anti-interference, stable ans reliable quality. The board has short circuit protection function, balanced voltage function, over discharge protection function, overcharge protection function, low conduction internal resistance functions.100% brand new and high quality.
Kuuleyn - When charging, it discharge battery which is fully charged first by resistor in order to balance current. This balancing module is used for lithium battery charging which has no balancing. Balancing charging would ensure each battery cell being fully charged at same time. It could balance voltage and current, used for 3S 11. 1v 18650 li-ion or 12. 6v li-polymer battery charging. This balancing module has no charge/discharge protection function, so it can not replace protection board.
Operalie - It could balance voltage and current, used for 3S 11. 1v 18650 li-ion or 12. 6v li-polymer battery charging. When charging, it discharge battery which is fully charged first by resistor in order to balance current. This equilibrium module has no charge/discharge protection function, so it can not replace protection board. This equilibrium module is used for lithium battery charging which has no balancing. Balancing charging would ensure each battery cell being fully charged at same time.
Fabater - Charging connector and discharging connector are separated, continuous discharging current is 15A. It has high voltage withstanding and low conduction resistance function.
siwetg - Equalization version: suitable for starting current below 80A, power 135W below the drill. Scope: nominal voltage of 3. 6v, 26650, 3.
