As an Amazon Associate I earn from qualifying purchases.1. Sadkyer
Sadkyer 1Pcs 4-Pin Molex to 3-Pin Fan Power Cable Adapter Connector Computer Cooling Fan Cables 12V/5V DC for CPU PC Case Fan
Sadkyer - Brand new and high quality. The cable can up to 4 fans, two fans for 12V DC for 5V DC. Instructions for use: two channels of 12v power supply, the 12v fan runs at full speed 12V is yellow and black wire two channels of 5V power supply, the 12V fan uses 5V to reduce the speed and reduce wind noise! 5V is red and black wire.
3. 2. The cable is compatible with standard 3-pin fans.
1. Use the 4-pin molex connector to power four 3-pin or 4-pin pwm connector PC case fans. The fan will run on molex's fixed of 12V only a 2-pin connector is required.
5. Because it is power supply, no speed measurement function, each small 4P plastic shell is only connected to 2 wires, no temperature control function. It suitable for cpu pc case fan, the fan speed will be slow if connect on 5v, or will be higher on 12v plug. 4. Allows you to connect four 4-pin tx3 fans to a single 4-pin molex LP4 power supply connector.
| Brand | Sadkyer |
| Manufacturer | Sadkyer |
| Height | 3 cm (1.18 Inches) |
| Length | 17 cm (6.69 Inches) |
| Weight | 0.01 kg (0.03 Pounds) |
| Width | 13 cm (5.12 Inches) |
| Part Number | 500281368A1 |
| Model | 500281368A1 |
2. PNGKNYOCN
PNGKNYOCN 30cm 12V DC 5.5 x 2.1mm to 4-Pin Molex with Switch Power Adapter Cable, for Molex Case Fans and More 2-Pack）
PNGKNYOCN - 3a; conductor material: Tinned copper; Wire guage: 22AWG. 4-pin male molex to dc 5. 5 x 2. 1mm cable to change the case fan to DC port for power supply. Connector a: dc 5. 5x2. 1mm connector ;B: big 4Pin Molex connector.
Rated current: max. 12v dc 5. 5 x 2. 1mm to 4 pin molex switch cablessupply power to various Molex devices wired with 12V, such as Molex chassis fans. Molded plastic rocker switches can quickly and comfortably turn your fan on or off.
3. YINETTECH
5 in 1 4-pin Molex to 5 x 3-pin / 4-pin PC Chassis Fan Separator PC Chassis Fan Separator Y Power Adapter Cable Compatible with 3 or 4 Pin Fans
YINETTECH - Design: the fan will run at a fixed molex voltage of 12V, but it still works well on your computer, allowing you to add as many fans as possible to your computer.
Product information: PC chassis fan separator Y power adapter cable. Packaging: 5 in 1 4-pin molex to 5 x 3-pin / 4-pin PC chassis fan separator. This sleeve adapter cable makes hiding the cable easy.
High quality: high density black casing cable, 27cm long, cable backward-compatible with standard 3-pin or 4-pin fans. Features: 4-pin actually 2-pin molex to 5 x 3-pin / 4-pin PMW connectors that give you more fan options while the input voltage is 12V.
4. Uinfhyknd
Uinfhyknd 1Pcs 4-Pin Molex to 3-Pin Fan Cable Adapter Connector Computer Cooling Fan Cables 12V/5V DC for CPU PC Case Fan
Uinfhyknd - 4. It suitable for cpu pc case fan, the fan speed will be slow if connect on 5v, or will be higher on 12v plug. Instructions for use: two channels of 12v supply, the 12v fan runs at full speed 12V is yellow and black wire two channels of 5V supply, the 12V fan uses 5V to reduce the speed and reduce wind noise! 5V is red and black wire.
Brand new and high quality. 2. The cable is compatible with standard 3-pin fans. Use the 4-pin molex connector to four 3-pin or 4-pin pwm connector PC case fans.
Because it is supply, no speed measurement function, each small 4P plastic shell is only connected to 2 wires, no temperature control function. The cable can up to 4 fans, two fans for 12V DC for 5V DC. Allows you to connect four 4-pin tx3 fans to a single 4-pin molex LP4 supply connector. The fan will run on molex's fixed of 12V only a 2-pin connector is required. 1. 3. 5.
| Brand | Uinfhyknd |
| Manufacturer | Uinfhyknd |
| Height | 3 cm (1.18 Inches) |
| Length | 17 cm (6.69 Inches) |
| Weight | 0.01 kg (0.03 Pounds) |
| Width | 13 cm (5.12 Inches) |
| Part Number | 500281368A1 |
| Model | 500281368A1 |
5. PNGKNYOCN
For Molex Case Fans and More 2-Pack）, PNGKNYOCN 40cm 12V DC 5.5 x 2.1mm to 4-Pin Molex with Switch Power Adapter Cable 1 to 2 Ways
PNGKNYOCN - Connector a: dc 5. 5x2. 1mm connector ;b: 2 x big 4Pin Molex connector. 3a; conductor material: Tinned copper; Wire guage: 22AWG. 4-pin male molex to dc 5. 5 x 2. 1mm cable to change the case fan to DC port for power supply.
Molded plastic rocker switches can quickly and comfortably turn your fan on or off. 12v dc 5. 5 x 2. 1mm to 4 pin molex switch cables one to two cables supply power to various Molex devices wired with 12V, such as Molex chassis fans. Rated current: max.
6. winwill
4Pcs USB to 4 Pin Molex Cooling Fan Connector Cable Adapter Cord for PC Quite Computer Case
winwill - Note：chassis fan must support low-voltage 5V to start，because USB voltage is 5V. One end is 4 pin chassis fan headerit only need + - to power the fan, so other 2pin is empty, and another end is the computer USB port.
Function：the cable can convert usb 5v into 12V for computer PC fan use，You can use the USB port to power the chassis fan. Cable length: 30cm/11. 8inch.
7. PNGKNYOCN
PNGKNYOCN Molex to Fan Power Splitter Cable, 4-Pin IDE Molex to 4X 3-Pin Y Type Case Cooling Fan Power Cable Adapter 12V（2-Pack）
PNGKNYOCN - Use to connect any 3pin fan to a 4pin molex connector, The cable can add up to 4 fans4 fans for 12V DC. Note: the 3-pin fan connector is only 2 pins/wire no tachometer pin/wire and the fan will run at maximum speed.
Molex connector 2 pin to psu, fan connector 2 pin for powering compatible with 3pin PC fans. Does not support PWM speed regulation. Fans will be operated at the fixed Molex voltage of 12V. Fan adapter cable 24awg, tinned copper conductor, length is approx 8cm / 3 inches.
8. PNGKNYOCN
PNGKNYOCN 3-Pin Fan to 4-Pin Molex Pass-Through Power Adapter Cable, 4-pin Molex/IDE to 3 Pin CPU Fan Power Cable（2-Pack）
PNGKNYOCN - Solve the problem of insufficient 3Pin interface ports on the PC motherboard. Connector 1: loop-through 4-pin Molex connector with male and female connections.
Note: the 3-pin fan connector is only 2 pins/wire no tachometer pin/wire and the fan will run at maximum speed. 3 pin atx fan to 4 pin Molex connector cable fan power adapter. Connector 2: 2 x 3-pin Fan Internal Male.
9. Siganorpy Airsun
4-Pin Molex to 4 x 3/4-Pin PC Case Fan Sleeved Adapter Cable, 3-Pin or 4-Pin PWM Connector to Molex Computer Cooler Cooling Fan Splitter Y Power Cable
Siganorpy Airsun - Cable length including connectors: 12"/30cm. Fans will be operated at the fixed molex voltage of 12V Only 2 pins in connector required.
Power four 3 pin or 4 pin PWM connector PC case fans with a molex connector. Quality high density black sleeving for all black appearance. Cable is compatible with standard 3 pin fans as sell.
Sadkyer - Brand new and high quality. The cable can up to 4 fans, two fans for 12V DC for 5V DC. Instructions for use: two channels of 12v power supply, the 12v fan runs at full speed 12V is yellow and black wire two channels of 5V power supply, the 12V fan uses 5V to reduce the speed and reduce wind noise! 5V is red and black wire.
PNGKNYOCN - 3a; conductor material: Tinned copper; Wire guage: 22AWG. 4-pin male molex to dc 5. 5 x 2. 1mm cable to change the case fan to DC port for power supply. Connector a: dc 5. 5x2. 1mm connector ;B: big 4Pin Molex connector. Rated current: max. 12v dc 5. 5 x 2. 1mm to 4 pin molex switch cablessupply power to various Molex devices wired with 12V, such as Molex chassis fans. Molded plastic rocker switches can quickly and comfortably turn your fan on or off.
YINETTECH - Design: the fan will run at a fixed molex voltage of 12V, but it still works well on your computer, allowing you to add as many fans as possible to your computer.
winwill - Note：chassis fan must support low-voltage 5V to start，because USB voltage is 5V. One end is 4 pin chassis fan headerit only need + - to power the fan, so other 2pin is empty, and another end is the computer USB port. Function：the cable can convert usb 5v into 12V for computer PC fan use，You can use the USB port to power the chassis fan. Cable length: 30cm/11. 8inch.
PNGKNYOCN - Use to connect any 3pin fan to a 4pin molex connector, The cable can add up to 4 fans4 fans for 12V DC. Note: the 3-pin fan connector is only 2 pins/wire no tachometer pin/wire and the fan will run at maximum speed. Molex connector 2 pin to psu, fan connector 2 pin for powering compatible with 3pin PC fans. Does not support PWM speed regulation. Fans will be operated at the fixed Molex voltage of 12V. Fan adapter cable 24awg, tinned copper conductor, length is approx 8cm / 3 inches.
PNGKNYOCN - Solve the problem of insufficient 3Pin interface ports on the PC motherboard. Connector 1: loop-through 4-pin Molex connector with male and female connections. Note: the 3-pin fan connector is only 2 pins/wire no tachometer pin/wire and the fan will run at maximum speed. 3 pin atx fan to 4 pin Molex connector cable fan power adapter. Connector 2: 2 x 3-pin Fan Internal Male.
Siganorpy Airsun - Cable length including connectors: 12"/30cm. Fans will be operated at the fixed molex voltage of 12V Only 2 pins in connector required. Power four 3 pin or 4 pin PWM connector PC case fans with a molex connector. Quality high density black sleeving for all black appearance. Cable is compatible with standard 3 pin fans as sell.
