As an Amazon Associate I earn from qualifying purchases.1. MeetRade
Stick On Double Sided Heavy Duty Adhesive Pad Disk For Lock Sucker Suction Cup Hook Mounting on Dashboard For xiaomi xiaoyi gopro camera GPS Sat Nav Cam 70mm, MeetRade Adhesive Suction Cup Mount
MeetRade - 5. Multi-purpose adhesive: this adhesive provide the best solution for your lock sucker hook, car mount and GPS, Also other mounting used. 4. Easy to move: when you need to move it, just peel it from the side and slowly pull it up.
Peel the protector film off, then apply on. 5. Press it at least 30 second. 6. Don’t use it in 12 hours. Even in a car, so can install the camera out side the house. 3.
Size and use: diameter 70mm2. 76 inch, fit for almost kind of suction cup! how to use: 1. 1. Where to use? your sucker is not strong enough and fall off often? This MeetRade super strong adhesive pad can help your suction cup to lock firmly.
Never fall again! 2. Material:made of 3m vhb super strong adhesive, it can help suction cup installs on not totally flat surfaces tightly. The adhesive is easily removable and never leave a residue. Br>high temperature resistance, water resistance, it also waterproof, the adhesive can work on the high temp. Clean the surface of the suction cup by alcohol. 2.
2. WINSKY
Suction Cup Holder for Nextbase Dash Cam 112 212 312GW 412 512GW, Nextbase Dash Cam Suction Cup Car Windscreen Mount Holder
WINSKY - With the ball head, arbitrarily rotating design, solid. Only suction cup part, strong adsorption power, the mini suction cup base design, ultra-short and small, dashboard ball holder not included.
Suitable for: nextbase dash cam 112 212 312GW 412GW Mini bracket. Do not shake after fixing, durable and durable! The particularly favorable price is reduced to the cost of the choice.
Can absorb a hard and smooth surface like desktop, glass. Can be installed freely on the windshield or the smooth surface of the car. Suitable for GPS, navigator, record leader. Instrument, direct current, dvr, camera and antenna with fixed alignment, dv movement, adsorption force crane load: 0.07 kg, conventional lifting: 1 kg.
3. Anteel
Anteel Dashboard Pad Mounting Disk Sticky Adhesive Replacement Kit, 6pcs 3.15"80mm Circle Heat Resistant Double-Sided Stickers for Suction Cup Car Phone Holder Disc & Windshield Dash Cam
Anteel - Please wait 24 HOURS to use. Press down repeatedly to increase the contact of the adhesive with the substrate. You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup. And wait at least 24 hours to use for the better adhesion. Cut into any size you need & compatible with suction baseyou can cut pads into smaller pieces if need.
Very high bond & easy to removethese high-strength, and protects adhesive surfaces against scratches, bonding almost instantly with no drying time. 6pcs clear adhesives replacementanteel offers 6 pcs round clear sticky adhesive padsDiameter: 3. 15"/80mm for attaching dashboard pad mounting disk of your suction cup dashboard phone mount.
6 pcs alcohol prep padsto maximize adhesive contact, please clean the adhesive surface with alcohol pad before use and let it dry, free of contaminates. When using, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, first easily peel off the white release film, then peel off the other red side film and stick to your car dashboard.
Compatible with most suction cup dashboard mount and other windshield long arm mount, EZ Pass/I-Pass/SunPass holder, ETC, GPS holder, wireless charger base, camera mount, dash camera mount holder etc on the market. It also resists heat and moisture, double-sided adhesive pads let you quickly and easily create a long-lasting bond, easy peels off without leaving any sticky residue behind. Easy to installprovided rounded rectangle raised label to easily peel off the red release film of the adhesive pads.
| Brand | Anteel |
| Manufacturer | Anteel |
| Height | 0.1 cm (0.04 Inches) |
| Length | 8 cm (3.15 Inches) |
| Width | 8 cm (3.15 Inches) |
| Part Number | Anteel_6D8A |
4. NULAXY
No Obstruction View Dashboard Windshield Car Phone Mount Strong Suction with Extra Gel Pad for iPhone 11 Pro Max/11/XS Max, NULAXY Car Phone Holder, Google Pixel 3 XL Other 4.7''- 6.5“, Galaxy S10
NULAXY - Strong suction and sturdy: innovative suction cup with thicker upgraded sticky gel for more reliable suction to car dashboard or windshield. An extra gel pad is enclosed for car with textured surface dashboard.
We are proud to offer a one year warranty and hassle free replacement to our customers. Easy mount and set up: quick release button allows one hand operation of installing or removing the phone. Buy with nulaxy assurance: nulaxy is a brand paying attention to each details.
Wide compatibility: can install both on dashboard recommended for safety or windshield; the mount is compatible with most phones like iPhone 11/11Pro Max/XR/X/Xs Max/8 Plus, Samsung Galaxy Note 10 Plus/10 9, and other 4. 7-6. 5 inch phones. No obstruction and better view: The arm is adjustable to keep the phone below your dashboard; the mount is rotatable for an ideal viewing angle.
| Brand | NULAXY |
| Manufacturer | NULAXY |
| Height | 7.11 cm (2.8 Inches) |
| Length | 17.27 cm (6.8 Inches) |
| Weight | 0.07 kg (0.15 Pounds) |
| Width | 8.89 cm (3.5 Inches) |
| Part Number | D3-11111 |
| Model | D3 |
5. Anteel
Anteel Dashboard Pad Mounting Disk Sticky Adhesive Replacement Kit, 6pcs 2.76"70mm Circle Heat Resistant Double-Sided Stickers for Suction Cup Car Phone Holder Disc & Windshield Dash Cam
Anteel - Extra strong both side clear adhesion pads's stickiness is 40% stronger than ordinary sticky adhesive. 6pcs clear adhesives replacementanteel offers 6pcs round clear sticky adhesive padsDiameter: 2. 76"/70mm, for attaching dashboard pad mounting disk of your suction cup dashboard phone mount.
Easy to installprovided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. Easy to fix your car phone socket base, truck, you can stable and secure driving uber, heavy duty dashboard mount base, vehicle in bumpy roads.
Press down repeatedly to increase the contact of the adhesive with the substrate. High temperature resistance sticky adhesive these stickers have high temperature120℃+ resistance performance. Please wait 24 HOURS to use. You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup.
Please do not hesitate to contact us and we will provide you our best after-sale service. Package includes6 x 2. 76"70mm round sticky adhesive, 6 x alcohol pads. You can use it without worry in hot Summer. When using, first easily peel off the white release film, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, then peel off the other red side film and stick to your car dashboard.
| Brand | Anteel |
| Manufacturer | Anteel |
| Height | 0.1 cm (0.04 Inches) |
| Length | 7 cm (2.76 Inches) |
| Width | 7 cm (2.76 Inches) |
| Part Number | Anteel_6D7A |
6. MeetRade
MeetRade 4PACK Dashboard Mounting Pad Disk With PU Sticky Adhesive Replacement Kit 95mm Circle Heat Resistant Double-Sided Stickers for Suction Cup Car Phone Holder Disc & Windshield GPS Dash Cam
MeetRade - Heavy duty transparent double-sided adhesive tape can be used for smooth surfaces such as glass, and leather surface, stainless steel, black TPU disc it can directly used on the dashboard, tile, or some other not smooth surface, etc. Note: please don't touch the adhesive with your finger.
Press down repeatedly to increase the contact of the adhesive with the substrate. Select a certain place to instal, wait 12 hours after install. Never fall again! two kinds materials, so that the suction cup bracket can firmly fixed on it and will never fall.
When using, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, first easily peel off the white release film, then peel off the other red side film and stick to your car dashboard.
The suction cup can be stably fixed on it and never fall off. Where to use? when you mount your car phone mount on dashboard, Your sucker is not strong enough and fall off often? Try MeetRade Mounting pad and super adhesive for lock sucker. Easy to installprovided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. 2 pack package include 2 pack of 95mm diameter base disc+2 Pack of 80mm Clear Double sided adhesive+2 Free cleaning Pad.
7. Summit
Summit RV-30 Large Flat Glass Mirror with Suction Pad
Summit - Attaches using a suction cup. Approximate size: 15. 5 x 7cm l x W. Rear view mirror. Easy to fit.
| Brand | Summit |
| Manufacturer | Summit |
| Height | 9.69 cm (3.81 Inches) |
| Length | 2.56 cm (1.01 Inches) |
| Width | 4.33 cm (1.7 Inches) |
| Part Number | RV30 |
| Model | RV-30 |
8. VANMASS
Phone Holder for Car Dash Windscreen Vent for All Phone-Rubber, 2021 Upgraded VANMASS Car Phone Holder 4 in 1, Patented Fingerprint Clamps & Air Capsule Pad & Super Suction Cup & Stable Air Vent Clip
VANMASS - Infinite viewing angleachieve the best infinite viewing angles by rotating the holder 360° horizontal and 120° arc through swivel ball joint & pivoting the telescopic arm up and down 270° and extending it from 5. 26" to 9. 81". This phone car holder has been comprehensively optimized and upgraded based on global customer feedback, VANMASS car phone holder can be used for dashboard/air vent/windscreen, is 5X stable and flexible than other in car phone holders.
What we upgraded8-gear stretchable bottom feet was designed to avoid clamp arms squeezing phone power/volume buttons and phone cradle blocking multiple cameras; Strongest suction cup loads up to 44LBS, made of pure PU with Nanotechnology, very sticky and won't melt under direct sunlight; Tightest clamps by innovatively optimizing 2 engaged gears for perfect 2-side control; Industry original steel-cored 3-gear lock vent clip has 20X stability & durability.
Upgraded 4-in-1 designwith the steel-cored 3-gear lock air vent clip and strong sticky suction cup, as well as desks for hands-free video calls. Battery/wallet case. Durable shock-absorbing silicone rubber on the phone cradle, ensure phone safety in an emergency braking, and it will stay firmly at the initial position. Friendly with smartphone 3. 5"-7. 3" with thick case, eg.
| Brand | VANMASS |
| Manufacturer | VANMASS |
| Weight | 0.25 kg (0.55 Pounds) |
| Part Number | VMEZ11CTBK1A-GL-1 |
| Model | CTEZ11 G |
9. ShipeeKin
Sony DSLR, 5,4 session,3+,3 SJCAM Series, Nikon, Geekpro, Garmin VIRB Xe, Xiaomi Yi 4k, ShipeeKin Heavy Duty 9CM Suction Cup Mount Car Windows Stand on Windshield Dashboard Bonnet for GoPro Hero 6
ShipeeKin - The kit can support camera of up to 3kg Weight, solid and strong. Supports slr dslr cameras, binoculars and other optical equipment with a standard 1/4 thread like Sony, and additional inclusive connector and long screw makes it also fit in Gopro Hero 6/5/5 Session/4/3/3+ Series, SJCAM, Xiaoyi 4k ect, garmin, Tom Tom, Canon, Geekpro ect.
The suction cup diameter is extreme large of 90mm/3.
55inch and offers great powerful suction capacity. It would be easy to stick on car windshield, window and any smooth surface. Made by two layer tpu material: ensure it can be stick strongly on windshield from -13 degree to 194 degree.
We use raw abs+pc and metal ball joint in order to be more durable while outdoor strenuous exercising. Securely attach your camera to your car window, glassware, windshield or even on bonnet. Adjustable joints and arms could enable you to select the best visual angle.
10. ShipeeKin
ShipeeKin Car Suction Cup Dash Cam Mount for Vehicle Video Recorder on Windshield & Dash Board with 13 Joints for Driving Camcorder GPS
ShipeeKin - Attaching to a clean and smooth surface to get maximum holding strength. Pvc windshield suction performs well in hot climates. Swivel ball adapter head provides flexibility for positioning the camera.
New 13 different joints kit suitable for most car dash cam, amebay, camcorder dvr on the market, falcon f170, VANTRUE, old shark, KDLINKS X1, include Rexing V1, Z Edge, yi, G1W G1W-H G1W-C G1W-B LS300W GT550S and other hot selling dash cam.
Different joints kit to suit most Car Dash Camera, GPS, Action Camera. Car dashboard/windshield rotating mount holder for car DVR GPS Camcorder holder. Dashboard suction cup diameter 5cm.
MeetRade - 5. Multi-purpose adhesive: this adhesive provide the best solution for your lock sucker hook, car mount and GPS, Also other mounting used. 4. Easy to move: when you need to move it, just peel it from the side and slowly pull it up.
WINSKY - With the ball head, arbitrarily rotating design, solid. Only suction cup part, strong adsorption power, the mini suction cup base design, ultra-short and small, dashboard ball holder not included.
Anteel - Please wait 24 HOURS to use. Press down repeatedly to increase the contact of the adhesive with the substrate. You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup. And wait at least 24 hours to use for the better adhesion. Cut into any size you need & compatible with suction baseyou can cut pads into smaller pieces if need.
NULAXY - Strong suction and sturdy: innovative suction cup with thicker upgraded sticky gel for more reliable suction to car dashboard or windshield. An extra gel pad is enclosed for car with textured surface dashboard.
Anteel - Extra strong both side clear adhesion pads's stickiness is 40% stronger than ordinary sticky adhesive. 6pcs clear adhesives replacementanteel offers 6pcs round clear sticky adhesive padsDiameter: 2. 76"/70mm, for attaching dashboard pad mounting disk of your suction cup dashboard phone mount.
MeetRade - Heavy duty transparent double-sided adhesive tape can be used for smooth surfaces such as glass, and leather surface, stainless steel, black TPU disc it can directly used on the dashboard, tile, or some other not smooth surface, etc. Note: please don't touch the adhesive with your finger.
VANMASS - Infinite viewing angleachieve the best infinite viewing angles by rotating the holder 360° horizontal and 120° arc through swivel ball joint & pivoting the telescopic arm up and down 270° and extending it from 5. 26" to 9. 81". This phone car holder has been comprehensively optimized and upgraded based on global customer feedback, VANMASS car phone holder can be used for dashboard/air vent/windscreen, is 5X stable and flexible than other in car phone holders.
ShipeeKin - The kit can support camera of up to 3kg Weight, solid and strong. Supports slr dslr cameras, binoculars and other optical equipment with a standard 1/4 thread like Sony, and additional inclusive connector and long screw makes it also fit in Gopro Hero 6/5/5 Session/4/3/3+ Series, SJCAM, Xiaoyi 4k ect, garmin, Tom Tom, Canon, Geekpro ect.
ShipeeKin - Attaching to a clean and smooth surface to get maximum holding strength. Pvc windshield suction performs well in hot climates. Swivel ball adapter head provides flexibility for positioning the camera.
