As an Amazon Associate I earn from qualifying purchases.1. fantaseal
11" Adjustable Robust Articulating Friction Magic Arm, DSLR/Mirrorless/Action Camera/Camcorder/Smartphone/LCD Monitor Video Vlog Rig w/Clamp Holder Mounts Kit fit for GoPro iPhone Arlo etc
fantaseal - Adjustable ball head design on both ends with standard 1/4-screw, monitor, action camera, photographic light, provide multi-angle shooting, suitable for camera, slide car equipment, tripod, video camera, camera rig etc. Attach with high-torque screw, compatible for gopro hero 9/8/7/ 6/ 5/ 4/ 3+/ 3/ session sony xiaomi yi yi 4k garmin virb x virb xe virb ultra 30 sjcam sj4000 sj4000wifi sj5000 sports camera + canon sony Nikon DSLR Camera + Camcorder, flash light, gopro adapter, dv monitor, led lights, camera rig, lcd field monitor, super wide phone clip, tripod and most of the smartphones such as iphone 12 11 XS MAX/ XR/ XS/X / 8+/ 8/ 7+/ 7/ 6s/ 6s+/ 6/ 6+ samsung huawei etc.
Meshing teeth design in the middle, provide more stability and security, easily tighten the joint of magic arm by turning the hi-torque screw.
11-inch mini magic arm, interview, photographing, maximum load weight is 1kg / 2.2lbs. Super clip made with non-slip rubber pad inside, increase the friction and reduce the scratch of the pole, more stable and secure, work with 47mm diameter pole in max. A perfect camera clamp mount for filming, with high-end aluminum polished, vlogging, made of aluminum alloy & stainless steel, shooting, recording, whenever you are in travel / on road trips/ voyage/ on tour.
| Brand | fantaseal |
| Manufacturer | Victool |
| Height | 2.6 cm (1.02 Inches) |
| Length | 20 cm (7.87 Inches) |
| Weight | 0.37 kg (0.82 Pounds) |
| Width | 6 cm (2.36 Inches) |
| Part Number | VGP-1704EU-T1 |
| Model | VGP-1704EU-T1 |
2. Wowteez
Dashboard Windscreen Car Phone Mount, Car Phone Holder, etc, HTC, Car Holder, Galaxys 20 10 9, Universal Car Cradle with One Button Release&Strong Sticky Gel Pad for iPhone12 12Pro Max 11 XS XR X 8 7
Wowteez - If you have to move, and then adjust the gear. Tip: sprinkle a little water in the place where the sucker is fixed, try not to move, please press the suction cup base first, keep good sealing, and the fixity is better. Note：remove the dust film from the bottom of the bracket before installing the car phone holder mount. Note: we do not recommend to apply the dashboard car mount on leather, wall or filmed glass surfaces as the suction cup is designed with strong viscosity and attraction; when you rinsing and air drying the suction cup please use the car phone holder after 24 hours.
Universal dashboard car phone holder: dashboard car phone holder clamp width: 45-93mm/1.
8-3. 7in, galaxys20/s10/s9/s8/s7, oneplus. Ultra sticky suction pad:car phone holder secure suction pad sticks tightly on the dashboard or most surfaces. 360 angle available: car phone holder provides full 360-degree rotation for portrait and landscape viewing and flexible two-section arm set the distance between the driver and cell phone, office, such as: kitchen, you can be mounted on any clean & smooth surface you want to install, The car phone holder widely Applicable from cars to trucks.
The car phone holder also can be used as a mobile phone holder, you can use mobile car phone mount watch videos. Silicone padded clamp: in order to better protect the mobile phone and avoid the direct friction between the mobile phone and the bracket, Google, Alcatel, Motorola, LG, Htc, phone holder suitable for iPhone12/12pro max/12 mini/11/11pro/11pro max/XS/XS Max/XR/x/8/7, we use silica gel pad as the connection. Silicone padded clamp causes no scratching to your precious phone.
| Brand | Wowteez |
| Manufacturer | Wowteez |
| Height | 13 cm (5.12 Inches) |
| Length | 8 cm (3.15 Inches) |
| Weight | 0.2 kg (0.43 Pounds) |
| Width | 8.51 cm (3.35 Inches) |
| Part Number | CA032EB-UK |
| Model | CA032EB-UK |
3. T opiky
T opiky Camera Bracket Adapter,1/4 in Mount Adapter Aluminum Alloy Extension Arm Accessory,FOR Backpack Clip/Selfie Stick/Tripod/Wrist Strap/Chest Strap,for Insta360 ONE X/X2 black
T opiky - The bracket adapter is suitable for Insta360 ONE X/X2, very practical. This product is easy to install, compact and portable, and can be carried around. Connect sports camera or panoramic camera with helmet mount/side mount or handle to make your shooting have a higher level.
Standard 1/4 inch screw adapter, can extend backpack clip/selfie stick/tripod/wrist strap/chest strap and more photography accessories. Made of cnc aluminum alloy, durable, wear‑resistant and resistant to damage.
| Brand | T opiky |
| Manufacturer | T opiky |
| Height | 1 cm (0.39 Inches) |
| Length | 1 cm (0.39 Inches) |
| Weight | 0.03 kg (0.08 Pounds) |
| Width | 1 cm (0.39 Inches) |
| Part Number | T opikyixcn64m1qw1403-11 |
4. RAM Mounting Systems
RAM Mount Double 1 Ball Adapter
RAM Mounting Systems - Possibly the highest quality mounting system in the world! Material: powder coated marine grade aluminium.
5. UGREEN
OnePlus, Pixel 4a, UGREEN Windscreen Car Phone Holder Suction Cup Dashboard Mobile Mount Long Arm Compatible with iPhone 12 SE 11 Pro Max XR XS 8 7, Galaxy S21 Ultra S20 FE S10 S9 A21s A51, Huawei
UGREEN - The stretchable spring clamp clips your phone firmly and keeps it in place even on bumpy roads. Ugreen 360-degree long arm suction Phone holder is great for maximizing your driving comfort and safety. Guarantee a safe driving: ugreen suction cup long arm phone holder mounts your phone on car windscreen or dashboard for hands-free GPS navigation or dash cam.
Infinite flexibility: with a 360-degree rotatable ball, the car window & dash suction phone mount can hold your phone securely horizontally or vertically. The dash window mount consists of 3 parts, including a one-button locked/released suction cup with sticky gel pad, an extendable long arm, and an adjustable clip holder.
Universal fit: the exendable spring clip of this suction cup car windshield dashboard holder fits 4. 7 to 7" phones of a slim protective case, nokia 9/8/7. 1/6. 1, xiaomi mi 10/redmi note 9, huawei p30 lite/p30 pro/p20, oneplus 8/7t/7 pro, google pixel 5/4a/4/3a/3 xl, galaxy s21 ultra/s21+/s21/s20 fe/s20 plus/s20 ultra/s10/s9/s8/s7/note20 ultra/note10+/a70/a50/a20e/A10/A21s/A51/A71, BlackView, like iPhone 12/12 Pro/12 Mini/SE 2020/11 Pro Max/11/XS/XR/X/8 Plus/7, moto g9/g8/g7, Sony L3/Z5.
Reliable & solid：the sticky suction windscreen dashboard car mount features four reinforcements to offer incredible stability and safety to your phone. The 2-level large suction cup76mm, sticky gel pad and one-button locker makes this mobile phone holder attach tightly to your car windscreen/dashboard or other smooth surfaces. Easy to fit: the car phone dashboard & windscreen suction holder features tool-free and simple installation.
6. ASUN
SJ6000, Car Mount Holder Adjustable Flexible Gooseneck Extension Magic Arm with Phone Mounting Bracket for GoPro Hero, YI, ASUN Suction Cup mount, iPhone and smart phone
ASUN - This jaws flex suction cup mount is made up of 4 joints and every joint can be rotated 360 degree, the cradle head of head adapter can be rotated to assist you adjust your camera well.
Adjustable neck design, achieve any shooting angle bend, provide any angle for recording. Also can be install inside the car, record the dribs and drabs around the journey. Also fit for phone which width between 55cm-86cm such as iPhone. We believe some pictures and videos will become precious memories for you.
It can be install outside the car, record the scenery along the way. Quick and easy to meet the needs of different directions taken. Strong suction cup can be strongly adsorbed on any smooth surfaces. Designed to standard adapter for most action cameras, xiaomi, fit for Gopro hero6/5/5 session, YI, AKASO EK5000and other sport camera which fit 1/4ff thread.
| Brand | ASUN |
| Manufacturer | ASUN |
| Part Number | TM-10 |
7. DesertWest
DesertWest Most Versatile Car Phone Holder Military Off-Road Grade with Latest Version Steel Air Vent Holder for Windscreen Dash Vent for iPhone 12/11/SE/XR/8/7/6, Galaxy S20+ A71 Note20 S21 S20 etc
DesertWest - The latest vent clip has a twist-lock feature, the telescopic aluminium arm can be adjusted by 270° and reach 18cm extended length, which is much more firmly than a push-fit. Infinite viewing angle car phone holder venthandy 360° rotation, easy to turn for sat nav viewing.
Easy to install on car dashboard/windshield/air vent/flat desk. Solid grip, it holds your phone perfectly each side and also at the adjustable bottom. One- touch to quickly release, we have upgraded to Fourth-Generation car phone holder that to make it more sturdy, very easy to use and set up the phone in and out with just ONE HAND.
Remove easily by pulling the suction pad without leaving any nasty mark. Worry-free after-sales & great giftduring use, we will provide you with the best solution; The elegant fashion car phone holder will bring you a good shopping experience, please contact us immediately, if you have any questions, perfect match with your family car! It can also be given as a gift to your family and your friends.
Anti-skid and shockproof design, entering a deceleration zone or bumpy road. Wash it with warm water and air drying to regain stickiness. Widely compatible mobile phone holders for carsthis car phone holder is compatible with all 3. 5 -7. 3 inches mobile phones like iPhone, Blackview etcthe holder clamp adjustable width is 6. 7-11cm.
| Brand | DesertWest |
| Manufacturer | DesertWest |
| Height | 11.99 cm (4.72 Inches) |
| Length | 27 cm (10.63 Inches) |
| Width | 7.7 cm (3.03 Inches) |
| Part Number | Car Phone Holder - UK |
| Warranty | Lifetime Warranty Against ManufacturerS Defects |
8. Camera & accessories
FUQUANDIAN Aluminum Square Mount Base With Ball Head For Ram Mount For Garmin Zumo Bracket accessories
Camera & accessories - Material: Aluminum Alloy+Rubber. Color: Black. Size: 50x42mm/1. 9x1. 6in. Our quality is 100% guaranteed, please rest assured to buy. Item type: Square Mounting Base.
9. APPS2Car
APPS2Car Universal Dashboard Windscreen Industrial-Strength Suction Cup Car Phone Mount Holder with Adjustable Telescopic Arm, 6 Strong Magnets for All Cell Phones, Magnetic Phone Car Mount
APPS2Car - Super solid suction cup: our patented industrial-strength suction cup base provides a strong, countertops, secure hold power on the dashboards, windshields, desks, tables and other surfaces. Securely holds your cell phone in place on the dash or windshield even with your car on the bumpy of roads and with the heaviest of smartphones.
Optimal viewing from almost any angle. Innovative ball joint construction allows you to adjust 360 degrees. From apps2car: best car mount designer and Supplier on the market, your phone has never had a better support system in the car! This phone holder for car compatible with all Smartphones for car, home or office.
Telescopic arm can be extended from 4. 6”/11. 7cm-6. 29”/16cm and can up or down for optimal viewing angle.
No more screw to adjusting, just pull and push to adjust the length. Please avoid to expose it to the sun in high temperature for a long time. Optimal viewing angle: 360 degree rotatable and adjustable & extendable telescopic arm to provide you infinite viewing angle. Please use the included 3M VHB dashboard pad if the surface you want to mount is not smooth but textured. Easy one hand operation! Quality promise & worry-free - apps2car brand come with lifetime friendly customer service.
| Brand | APPS2Car |
| Manufacturer | Wiiki-Tech |
| Height | 5.99 cm (2.36 Inches) |
| Length | 11.51 cm (4.53 Inches) |
| Width | 7.01 cm (2.76 Inches) |
| Part Number | M02 Pro-S02 |
| Model | M02 Pro-S02 |
10. NUNET
Strong Glass Mounting Kit Tool Dent Puller for Car/Boat/Frame/Window, NUNET Suction Cup Mount for Heavy Duty DSLR/NuCam WR/Gopro, Metal Extention Arm for 360° Camera Holder Double Ball Head
NUNET - Ideal for our nucam wr backup camera ASIN: B01BH7G0HG. The carabiners with tethering rope in the package will keep your camera safety from dropping down. Wide application: metal extension arm clamp mount with double ball head adapter be available to cover most applications and capacity requirements.
Powerful suction cup lock function: when suction cup is locked in place, it can lift horizontally up to 50 kg/110 lb of weight, vertical suction is up to 40 kg/88 lb.
Durable and impact resistant: made with durable handles and an impact-resistant housing to withstand work site abuse. Heavy-duty rubber suction cup allows for gentle and scratch-free use. The sucker diameter is 12.
5cm/4. 9in. Designed to pull dents from nearly any vehicle surfaces including metal and plastic. The tools can be used to mount cameras, signs, scopes, lights, antennas, testing equipment, gopro, and much more. Warranty: 1 year 100% satisfied quality guarantee. Any issues please contact us. Fit for any non-porous & smooth &flat surface like as wall, glass, then close the handle and lock, place it on the smooth surface, metal, wood and plastic.
fantaseal - Adjustable ball head design on both ends with standard 1/4-screw, monitor, action camera, photographic light, provide multi-angle shooting, suitable for camera, slide car equipment, tripod, video camera, camera rig etc. Attach with high-torque screw, compatible for gopro hero 9/8/7/ 6/ 5/ 4/ 3+/ 3/ session sony xiaomi yi yi 4k garmin virb x virb xe virb ultra 30 sjcam sj4000 sj4000wifi sj5000 sports camera + canon sony Nikon DSLR Camera + Camcorder, flash light, gopro adapter, dv monitor, led lights, camera rig, lcd field monitor, super wide phone clip, tripod and most of the smartphones such as iphone 12 11 XS MAX/ XR/ XS/X / 8+/ 8/ 7+/ 7/ 6s/ 6s+/ 6/ 6+ samsung huawei etc.
Wowteez - If you have to move, and then adjust the gear. Tip: sprinkle a little water in the place where the sucker is fixed, try not to move, please press the suction cup base first, keep good sealing, and the fixity is better. Note：remove the dust film from the bottom of the bracket before installing the car phone holder mount. Note: we do not recommend to apply the dashboard car mount on leather, wall or filmed glass surfaces as the suction cup is designed with strong viscosity and attraction; when you rinsing and air drying the suction cup please use the car phone holder after 24 hours.
T opiky - The bracket adapter is suitable for Insta360 ONE X/X2, very practical. This product is easy to install, compact and portable, and can be carried around. Connect sports camera or panoramic camera with helmet mount/side mount or handle to make your shooting have a higher level. Standard 1/4 inch screw adapter, can extend backpack clip/selfie stick/tripod/wrist strap/chest strap and more photography accessories. Made of cnc aluminum alloy, durable, wear‑resistant and resistant to damage.
RAM Mounting Systems - Possibly the highest quality mounting system in the world! Material: powder coated marine grade aluminium.
UGREEN - The stretchable spring clamp clips your phone firmly and keeps it in place even on bumpy roads. Ugreen 360-degree long arm suction Phone holder is great for maximizing your driving comfort and safety. Guarantee a safe driving: ugreen suction cup long arm phone holder mounts your phone on car windscreen or dashboard for hands-free GPS navigation or dash cam.
ASUN - This jaws flex suction cup mount is made up of 4 joints and every joint can be rotated 360 degree, the cradle head of head adapter can be rotated to assist you adjust your camera well.
DesertWest - The latest vent clip has a twist-lock feature, the telescopic aluminium arm can be adjusted by 270° and reach 18cm extended length, which is much more firmly than a push-fit. Infinite viewing angle car phone holder venthandy 360° rotation, easy to turn for sat nav viewing.
Camera & accessories - Material: Aluminum Alloy+Rubber. Color: Black. Size: 50x42mm/1. 9x1. 6in. Our quality is 100% guaranteed, please rest assured to buy. Item type: Square Mounting Base.
APPS2Car - Super solid suction cup: our patented industrial-strength suction cup base provides a strong, countertops, secure hold power on the dashboards, windshields, desks, tables and other surfaces. Securely holds your cell phone in place on the dash or windshield even with your car on the bumpy of roads and with the heaviest of smartphones.
NUNET - Ideal for our nucam wr backup camera ASIN: B01BH7G0HG. The carabiners with tethering rope in the package will keep your camera safety from dropping down. Wide application: metal extension arm clamp mount with double ball head adapter be available to cover most applications and capacity requirements.
